A restaurant interior has a harder job than a home. It has to work for a stranger on a first visit, for a waiter carrying three plates, for a kitchen under pressure at nine on a Saturday, and for a landlord’s fit-out deadline — and it has to still look intentional after four years of being cleaned every night.
Most rooms that fail do not fail on taste. Here is what restaurant interior design in Delhi actually has to solve, in the order it has to be solved.

Start with covers and circulation, not mood
The plan is a commercial document. Every decision after it is constrained by it.
The temptation is to maximise seats. The error is that an over-seated room reduces what each table spends, slows service, and feels cheap regardless of what it is made of. The dimensions that decide it:
- Allow roughly 600–700mm of table width per cover, and about 700mm of depth for a place setting.
- 450–500mm behind a seated diner for the chair to pull out.
- 750mm minimum to pass behind a seated diner — and this is where most tight rooms fail, because staff end up asking guests to lean forward all evening.
- 900–1000mm clear between table edges for a service aisle; 1200mm or more for a main circulation route.
- Banquettes buy you space — a 600mm seat depth against a wall removes the pull-out zone on that side entirely, which is why they appear in every efficient plan.
Then check the service path: kitchen pass to the furthest table, and whether a loaded tray can make that journey without crossing the entrance queue. If it cannot, the plan is wrong no matter how it looks.
Acoustics is the thing people actually complain about
Ask anyone why they did not return to a restaurant and a remarkable number will say they could not hear each other. It is the most common failure in new Indian restaurants and the most ignored at design stage.
The cause is structural to the brief: floors must be hard for cleaning, tables are hard, glazing is hard, and the fashionable finish is exposed concrete or stone. With nothing absorbent in the room, every voice reflects and the room’s own noise forces everyone to talk louder.
The ceiling is where this gets fixed, because it is the one large surface with no competing requirement. Acoustic absorption in the ceiling — concealed behind slats, perforated panels, stretched fabric, or baffles treated as part of the design — does most of the work. Upholstered banquettes, heavy curtains, and soft wall panels at seated-head height do the rest. Retrofitting this after opening is possible but visible, and always compromised.
Light the faces, not the floor
People decide how they feel about a room in the first few seconds, and almost all of that is the lighting.
- One warm colour temperature throughout — around 2700K — with high colour rendering, so food and skin read properly.
- Light the table surface, tightly. A pool of light on the table and a darker surround is what makes a room feel intimate rather than lit.
- Avoid a downlight directly over a seated head. It puts a shadow under the eyes and nobody looks well.
- Dim through the day. A room that works at lunch and at eleven at night needs at least three scenes, not one switch.
- Light the entrance and the bar brighter than the dining floor, so the room reads with depth from the door.
The services decide the programme
In a restaurant, the invisible systems are not a background task — they are the critical path, and they have to be coordinated before any finish is chosen.
- Kitchen exhaust and make-up air. A grease duct has to get from the kitchen to a discharge point the building and the neighbours accept. On a leased floor this is frequently the single hardest constraint, and it can invalidate a layout.
- Air conditioning in a Delhi summer, sized for a full room plus a hot kitchen line, with supply that does not blow across tables.
- Drainage and grease traps, with real falls — which affects floor levels.
- Water, gas and power loads confirmed against what the premises actually has, not what you need.
- Washrooms. Judged harshly, and remembered. Disproportionate to their area in how they affect a review.
Approvals and the landlord
Design in Delhi has to be drawn against what will actually be permitted. The categories to confirm early, for your specific premises and seating count: the municipal health trade licence, fire clearance requirements, FSSAI registration, excise licence if you intend to serve alcohol, and any conditions in your lease or from the building. Mall and complex premises usually add their own fit-out rules, working hours and material restrictions.
None of this is design, and all of it changes design. Confirm it before drawing, not after.
Material that survives service
A restaurant is cleaned aggressively every night. The test for any surface is not how it photographs on day one but how it looks in year three.
- Floors slip-resistant when wet, and cleanable — particularly on the service path and at the kitchen door.
- Table edges and chair backs take the most abuse; solid material at those edges, not veneer on a corner.
- Upholstery in performance fabric or leather, specified with a rub count, and ideally with removable seat pads.
- Walls to seated-shoulder height will be scuffed. Plan a durable or replaceable band there.
- Avoid finishes with no replacement route. If a panel cannot be swapped without rebuilding the wall, it will eventually look damaged permanently.
Designing for a second visit
A room that is strongly themed gets photographed on opening week and dates within two years. A room with good proportion, resolved detail and comfortable acoustics gets returned to. The commercial argument is the same as the design one: identity should sit in a few deliberate moves — a bar, a ceiling, one material decision — against a calm envelope, rather than in a theme applied everywhere.
Frequently asked questions
How much space do you need per seat in a restaurant?
Allow roughly 600–700mm of table width per cover with about 700mm depth, plus 450–500mm behind each chair to pull out and 750mm to pass behind a seated diner. Service aisles want 900–1000mm clear between table edges. Squeeze these and the room reads cheap however it is finished.
Why are new restaurants so loud?
Because the finishes are all hard — stone floors, glass, exposed ceilings, hard tables — and nothing absorbs sound. The fix is absorption in the ceiling, plus upholstery and soft surfaces at seated-head height, designed in rather than added later.
What usually delays a restaurant fit-out?
Kitchen exhaust routing, electrical load confirmation, and approvals. All three are decided outside the design and all three can stop it. They should be resolved before drawings are finalised.
Should a restaurant interior follow a theme?
Themes photograph well and date fast. A calm, well-proportioned envelope with two or three deliberate moves holds up far longer — which matters, because a fit-out has to earn back over years, not weeks.
What lighting temperature is right for a restaurant?
A single warm temperature around 2700K with high colour rendering, dimmable, with separate scenes for day and night. Light the table rather than the floor, and never place a downlight directly above a seated head.
How we work
Pochē Aesthetics — also written Poche Aesthetics — is primarily a luxury residential architecture and interior design practice in Greater Kailash, New Delhi, founded and led by architect Niyati Satsangi, and we take select restaurant and commercial projects alongside that work. We will say plainly whether a project suits us.
What we bring from residential work is the part restaurants most often lack: the plan and the detail resolved on paper before anything is built, lighting designed as its own layer, and supervision against the drawings on site.
If you are planning a restaurant or a hospitality space in Delhi, tell us about it. See also how lighting layers are planned, bar design dimensions, and which materials survive in Delhi.
About Pochē Aesthetics
Pochē Aesthetics — also written Poche Aesthetics — is a luxury residential architecture and interior design practice based in Greater Kailash, New Delhi, founded and led by architect Niyati Satsangi. Over more than twelve years the practice has designed private homes — farmhouses, villas, builder floors and apartments — across Delhi NCR and India, handling architecture, interiors, materials, lighting and styling as one connected commission, alongside select restaurant and commercial work. More about the practice.